Omschrijving
The tape has been designed with outstanding adhesion strength and complies to IMO fire protection regulations as certified according to FTP code 2010. Joints and connections can be easily and fast sealed giving a high aesthetic finish, especially if alu-faced insulation remains uncovered. The tape is self-adhesive and can be teared manually, which means no cutting tools are needed to ease the work at the jobsite.
Technische Eigenschappen
Symbol | Unit | Quantities and declared values | Standard | |
---|---|---|---|---|
Dangerous substances | Symbol- | Unit- | Quantities and declared valuesFree of isocyanate, PVC, heavy metals and halogens | Standard- |
Reaction to fire | Quantities and declared valuesIMO Low flame spread according to FTP Code 2010 (Marine Equipment Directive 96/98 EC) | StandardIMO FTP Code 2010 | ||
Tensile strength | UnitN/25 mm | Quantities and declared values40 | StandardASTM D3759 | |
Application field | Unit- | Quantities and declared valuesFor sealing of joints between Isover Alu faced mineral wool products and sealing of joints between Alu facings and metal Acts as a barrier against water and water vapour, provides safe protection against moisture penetration | Standard- | |
Tape thickness excluding release liner | Unitmm | Quantities and declared values0.06 + / - 10 % | ||
Adhesion to steel peeling | UnitN/25 mm | Quantities and declared values15 | StandardASTM D3330 | |
Elongation at break warp | Unit% | Quantities and declared values3.0 | StandardASTM D3759 | |
Storage conditions | Unit- | Quantities and declared valuesRoom temperature (~20 °C/50 % relative humidity) Should be protected from humidity and not exposed to UV or heat source | Standard- | |
Adhesive | Quantities and declared valuesAcrylic glue, Paper backing liner | |||
Carrier material | Quantities and declared valuesAluminium foil, thickness 26 microns | |||
Instructions for use | Quantities and declared valuesFor any special use considered, suitability must be checked with shipyard and/or respectively class surveyor, by doing if required application tests onboard For good installation, as for all pressure-sensitive tapes, it is sufficient to apply the correct contact pressure on the SeaProtect Tape Alu to bond it on top of Alu faced mineral wool products Surface must be dry, free of dust and grease | |||
Operation temperature range | Quantities and declared values-40 °C – +80 °C | |||
Water vapour permeability | Unitg/m² x 24 h | Quantities and declared values< 1.0 | StandardAFERA 4002 | |
Water vapour diffusion equivalent Sd | Unitm | Quantities and declared values> 1500 | StandardDIN 52615 | |
Miscellaneous | Unit- | Quantities and declared valuesFor ageing tests carried out by ISOVER to ensure that strong bonding properties still occur after 90 days, at 65 °C / 80 % relative humidity | Standard- | |
Processing temperature | Unit[°C] | Quantities and declared values-5 °C – +40 °C |